Fork with grab

Machine power

All power

Features

Density < 1t/m? | Volume based on ISO 7546 norm | Forged fork tines | Oxycut grab tines
Hydraulic: dual hydraulic flow regulator, hoses and push pull-not included.
It is absolutely necessary to lower the pressure and the hydraulic flow provided by the machine
which need to be equipped with a double-acting line (max. pressure: 180 bars - max. flow 80l/min).
The machine's settings must be carried out by a qualified technician.
We will advise you based on the use | If the machine is equipped with a direct hitch, please contact us

7300 Fork with grab
Reference Width (mm) Volume (l)
FGIRF35190/1.1AR 1,900 1,100
FGIRF35210/1.2AR 2,100 1,200
FGIOLF110250/2.0AR 2,500 2,000
FGIOLF110275/3.0AR 2,750 3,000
FGIOLF130275/3.5AR 2,750 3,500
FGIOLF130275/4.0AR 2,750 4,000
FGIOLF130300/4.5AR 3,000 4,500

In the same category...

Information request Are you interested in this model and would like to be contacted by our team?