Grab bucket
Reinforced SHARK – Forged tines
Machine power
All power
Features
Height: 1 150 mm | Depth: 1 120 mm | Grab opening: 1 700 mm | Shell and sides: 10 mm
Wear blade (400 HB) | Reversible bolt-on counter-wear blade (400 HB) | Hinge pin Ø 45 mm
Reversed corner piece | Grab tines Ø 35 mm | Flat top | 2 hydraulic cylinders Ø 80 mm
Reinforcement at the bucket roll at the bottom of the attachment | Reinforced pivot | Lateral side plates
Wear pads under the bucket | Square level and push pull support | Reinforced oxycut tines | Double grab
| 3331 Reinforced SHARK – Forged tines | |||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reference | Width (mm) | ||||||||||||||||||||||||||||||||||||||
| BGTLRF2/210-RENF | 2,100 | ||||||||||||||||||||||||||||||||||||||
| BGTLRF2/230-RENF | 2,300 | ||||||||||||||||||||||||||||||||||||||
| BGTLRF2/250-RENF | 2,450 | ||||||||||||||||||||||||||||||||||||||
| BGTLRF2/270-RENF | 2,700 | ||||||||||||||||||||||||||||||||||||||
